BS Skycast PT (1 Kg)

BS FloorDense concrete densifier is a liquid chemical hardener to be applied on top of the concrete floor after cast floor has cured for minimum 21 days.
It can be left as it is after application or buffed for mild sheen or even polished for higher sheen level.
If polishing has to be done BS FloorDense is to be used after mininum 21 days of curing the cast slab. Grinding and polishing process has to be executed to achieved the desired finish
It doesn’t matter if the concrete floor is polished or not, using BS FloorDense densifier is improves strength, abrasion resistance, surface hardness and service life of the treated concrete floor.
BS FloorDense works as a micro pore filler in the concrete structure on the top of floor slab and increases its surface density. After application BS FloorDense penetrates deeply in the concrete surface, starting a reaction in the pores and creates an insoluble material filling the micro pores in the concrete slab.
This process hardens the concrete surface also reducing the pitting effect.
BS FloorDense improves the concrete floor durability significantly as compared to untreated concrete floor.

After cleaning the cured concrete floor and from loose dust, using water and cleaning machine leave the floor to dry out for 7 to 8 hours
Apply BS FloorDense by spreading with Rubber Wipers
Work in the chemical when spreading it by pressing and dragging the liquid on the floor
Ensure that the floor is fully saturated and no more absorbing the chemical
Remove and excess liquid by wiper, do not let the material stagnate / pond on the floor
Aftre 45 to 50 minutes of treatment, wash of the surface again with water.
You can use electrical / wiping machine with water to do the same and clean the treated surface
Let the surface dry for 7-8 hours
The surace will gain automatic sheen and reflectance in 25-45 days